Home Auto Repair How to Install Ambient Lights on 2019 Honda Passport

How to Install Ambient Lights on 2019 Honda Passport

160

Download 2019 Honda Passport Ambient Lights Installation Instructions – 1. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery. 2. Remove the passenger’s dashboard under cover. 3. Pull away the door opening seal, and remove the driver’s dashboard side lid. 4. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors, and release the vehicle sensor.

5. Remove the tape to free the vehicle 2-pin connector. 6. Install the ambient light to the instrument panel as shown. 7. Plug the vehicle 2-pin connector into the ambient light. 8. Install the ambient light to the passenger’s dashboard under cover as shown. 9. Remove the tape to free the vehicle 2-pin connector. 10. Plug the vehicle 2-pin connector into the ambient light harness 2-pin connector. Secure the 2-pin connectors to the vehicle harness with one wire tie.