Download 2019 Honda Passport Door Edge Guards Installation Instructions – 1. Identify each door edge guard by holding it up to the door and matching its contour with the door edge. 2. Clean and wax the areas to be covered with a high quality paste wax. 3. Gently place the left front door edge guard on the left front door. Line up the left front door edge guard with the contour of the door. Mark the inner door lip at the top edge and the sealant at the bottom edge of the left front door edge guard.
4. Remove the left front door edge guard. 5. Position the cutting edge of the seam sealant cutting tool against the door edge and carefully trim the seam sealant from mark to mark. The cutting tool cuts in only one direction. 6. Apply touch-up paint to the cut seam sealant area, and let it dry thoroughly. 7. Repeat steps 3 through 6 on the right front door. 8. Peel back the left rear door seal, and secure it to the left rear door panel with masking tape as shown.