1.Turn the steering wheel fully clockwise.
2.While wearing eye protection, drill the dimple to 6 mm. First, drill with a 3 mm drill bit, and finish with a 6 mm drill bit. Remove any burrs.
NOTE: Make sure to drill perpendicular to the front bumper and front inner fender.
3.Turn the steering wheel fully counterclockwise, and repeat step 2 on the right side of the vehicle.
4.Disconnect the negative cable from the battery:
•Wrap a shop towel around the hood latch.
•Remove the front bulkhead cover.
•Remove the intake air tube.
•Disconnect the negative cable from the battery.