Home Auto Repair How to Install Rear Lower Trim on 2019 Honda Passport

How to Install Rear Lower Trim on 2019 Honda Passport

122

INSTALLATION

NOTE: Do not install on vehicles with a trailer hitch.

1. Open the tailgate.
2. Disconnect the negative cable from the battery:
• Wrap a shop towel around the hood latch.
• Remove the front bulkhead cover.
• Remove the intake air tube.
• Disconnect the negative cable from the battery.
3. Open the right rear door.
4. Remove the two self-tapping screws.
5. Release the right rear wheel arch protector.
6. Repeat steps 3 through 5 on the left side of the vehicle.