CD Player Installation On Vehicles with Infotainment Control Unit
When installing the Accessory CD Player on a vehicles with an Infotainment System Control Unit (EX, EX-L, and Touring trim levels). Make sure you connect the 12-pin connector in step 20 to the correct vehicle connector. The CD player 12-pin connector has two wires and the correct vehicle 12-pin connector has two wires.
NOTE: There are two other 12-pin connectors in the same general area that serve as circuit junctions. Removing the junction caps on these connectors will cause various circuits to not work.
1. Disconnect the negative cable from the battery:
• Wrap a shop towel around the hood latch.