Home Auto Repair How to Install Door Edge Films on 2019 Honda Pilot

How to Install Door Edge Films on 2019 Honda Pilot

253

INSTALLATION
1. Open the left rear door. Peel back the left rear door seal, and secure it to the left rear door panel with masking tape as shown.
2. Using an alcohol swab, thoroughly clean the area where the left rear door edge film will attach.
3. Open the left front door. Using an alcohol swab, thoroughly clean the area where the left front door edge film will attach.
4. Close the left front and rear doors. Using a spray bottle with 3M protective tape application solution, spray the area where the left front door edge film will attach. NOTE: Spray the outer surface of the door only.
If the vehicle is equipped with body side moldings, go to step 7; otherwise, continue with step 5.
5. Open the left front door again. Peel back about 50 mm (1.97 in.) of adhesive backing from the left front door edge film. Line up the V-notch in the left front door edge film with the character line of the left front door.