Home Auto Repair How to Install Door Sill Protection on 2019 Honda Pilot

How to Install Door Sill Protection on 2019 Honda Pilot

240

Installing the Door Sill Protection Film
1. Open the left front door, and apply masking tape to the vehicle panel as shown.
2. Using the alcohol wipe, thoroughly clean the vehicle panel where the left front door sill protection film will attach.
3. Using a spray bottle with the 3M protective tape application solution, spray the vehicle panel where the left front door sill protection film will attach.
4. Remove the adhesive backings from the left front door sill protection film.
NOTE: Check the identification mark of the left front door sill protection film.
5. Spray the left front door sill protection film with the 3M protective tape application solution.
6. Line up the left front door sill protection film with the curve end and masking tape as shown. Then, attach it to the vehicle panel.
7. Insert the applicator into the felt sleeve.
8. Starting from the inside and working outward, use the felt sleeve to smooth out the left and right sides of the upper section of the left front door sill protection film.