Home Auto Repair How to Install Front Lower Trim on 2019 Honda Pilot

How to Install Front Lower Trim on 2019 Honda Pilot

293

INSTALLATION
1. Disconnect the negative cable from the battery:
• Wrap a shop towel around the hood latch.
• Remove the front bulkhead cover.
• Remove the intake air tube.
• Disconnect the negative cable from the battery.
2. Remove the three self-tapping screws.
3. Remove the left front wheel arch protector.
4. Repeat steps 2 and 3 on the right side of the vehicle.
5. Remove the front bumper:
• Using a flat-tip screwdriver, remove the H emblem.
• Remove the front upper grille.
• Apply masking tape as shown.
• Remove the four self-tapping screws, eight clips, and eight flange bolts.
• With the help of an assistant, release the seven retaining tabs on each side.
• Release the front grille.