Home Auto Repair How to Install Illuminated Door Sill Trims on 2019 Honda Pilot

How to Install Illuminated Door Sill Trims on 2019 Honda Pilot

341

INSTALLATION
1. Disconnect the negative cable from the battery:
• Wrap a shop towel around the hood latch.
• Remove the front bulkhead cover.
• Remove the intake air tube.
• Disconnect the negative cable from the battery.
2. Remove the passenger’s dashboard under cover, and unplug the vehicle connector (if equipped).
3. Remove the passenger’s door sill trim.
4. Pull away the door opening seal, and remove the passenger’s kick panel.
5. Pull away the door opening seal, and remove the driver’s dashboard side lid.
6. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors, and release the vehicle sensor.
7. Remove the driver’s door sill trim.
8. Pull away the door opening seal, and remove the driver’s kick panel.
9. Attach a piece of masking tape to the vehicle panel as shown.