ENGINE REMOTE START SYSTEM REGISTRATION
NOTE: The PCM code will be required for this procedure.
1.Connect the HDS to the data link connector.
2.From the Immoblizer setup tool, select ONE-PUSH START, then go to Registration.
NOTICE: Do not enter the 2-WAY KEYLESS SETUP menu. Performing this operation will damage the Keyless Access Control Unit.
3.Select KEYLESS ACCESS Remotes, then Add a KEYLESS ACCESS Remote and follow the HDS prompts.
4.Repeat step 3 for any additional Remote Starter remote.
5.After registration, verify all remote-related systems work normally with all remotes.