Home Auto Repair How to Install the Roof Rack on a 2019 Honda Pilot

How to Install the Roof Rack on a 2019 Honda Pilot

443

INSTALLATION
1. Apply one piece of masking tape to the vehicle panel and one to the left roof molding as shown. Using a felt-tip pen, mark a line in the center on each piece of masking tape as shown.
If the roof molding is equipped with a plastic cap, go to step 2; otherwise, go to step 4.
With plastic cap
2. Remove the plastic cap from the left roof molding as shown.
3. Remove the nut from the roof stud bolt.
4. Remove the left roof molding as shown.
5. Remove the four molding clips from either the left roof molding or the roof stud bolts.
6. Using a putty knife, remove any excess sealant.
7. Using a felt-tip pen, mark the left roof molding as shown.
8. While wearing eye protection, use an air saw to cut the left roof molding at the four marks. Remove any burrs.
9. Install the two new molding clips to the left roof molding.
If the roof molding is equipped with a plastic cap, go to step 11; otherwise, continue with step 10.