Download 2004-2006 Pontiac GTO LPE High Flow Fuel Pump Upgrade Kit – 1. Remove all items from trunk. Remove felt spare tire cover. 2. Remove plastic snap-tabs with fork tool or similar tool (7 total snaps.) 3. Remove felt gas-tank cover. 4. Use an E18 inverted torx socket to remove the bottom two fuel-tank cage retaining bolts. 5. Removing the E18 torx bolt. 6. Use a 13mm socket to remove the top two fuel-tank cage retaining bolts. 7. Remove the fuel-tank retaining cage. 8. Unplug the fuel pump wiring harness plug. 9. Remove the top two retaining strap bolts with a 13mm deep socket. 10. Remove the driver’s side plastic vanity cover under the hood. 11. Unscrew the plastic Schrader valve cover. 12. Place a rag underneath the valve & depress the stem with a small screwdriver to relieve fuel pressure. NOTE: Fuel will escape from the valve. Be sure to keep heat sources away from the area. Eye protection recommended. 13. Replace the Schrader valve cap and vanity cover. 14. Use a jack to lift the vehicle and place on jack stands at locations stated in the owner’s manual.