Home Auto Repair ’06-07 Honda CBR1000RR Cut Frame Slider Installation Manual

’06-07 Honda CBR1000RR Cut Frame Slider Installation Manual

92

Download ’06-07 Honda CBR1000RR Cut Frame Slider Installation Manual – 1. Identify right slider, bolt, and aluminum offset. The right slider is attached to the shorter aluminum offset. The right slider uses the longer engine mount bolt provided. Remove right and left body panels. 2. Remove factory engine mount bolt from right side of motorcycle. DO NOT remove both engine bolts at the same time! Retain factory spacer between engine and frame. Re-insert factory spacer and Install right side frame slider assembly with the longer bolt supplied. Tighten bolt to manufacturers torque specification. Tighten frame slider to offset. 3. Re-install right side body panels. Use the supplied spacer to provide clearance for the frame slider assembly. 4. Remove factory engine mount bolt from left side of motorcycle. 5. Install left side frame slider assembly with the remaining engine bolt supplied. Tighten bolt to manufacturers torque specification. Tighten frame slider to offset. 6. Re-install left side body panels. Use the supplied spacer to provide clearance for the frame slider assembly.