Home Auto Repair Dodge Caravan Automatic Transmission Repair Procedure

Dodge Caravan Automatic Transmission Repair Procedure

96

Download Dodge Caravan Automatic Transmission Repair Procedure – USING THE INTERNET TO RETRIEVE THE FLASH FILE: NOTE: If this flash process is interrupted/aborted, the flash should be restarted. 1. Reprogram the PCM with the latest software. Follow the detailed service procedures available in DealerCONNECT/TechCONNECT, Refer To Group 8 – Electrical > Electronic Control Modules – Service Information > Module – Powertrain Control > Standard Procedures > PCM/ECM Programming – Gas. After PCM reprogramming, the following must be performed: a. Clear the Variable Line Pressure (VLP) Counters, found in the StarSCAN® Misc Function Menu. VLP Clear Counters must be completed on all models with a 62TE transmission. b. Clear any DTC’s that may have been set in other modules due to reprogramming.
c. Perform the Quick Learn function, found in the StarSCAN® Misc Function Menu. 2. Type the necessary information on the “Authorized Modification Label” and attach it near the VECI label. DIAGNOSIS: Using a Scan Tool (StarSCAN®) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as designed. If DTC’s are present record them on the repair order and repair as necessary before proceeding further with this bulletin. If the above symptom/condition is experienced or can be verified, perform the Repair Procedure.