Download 2015 Acura RLX Body Side Moldings Installation Manual – Installing the Body Side Moldings 1.Using the alcohol swab, thoroughly clean the left front door where the left front molding will attach. 2.Get the front template. Fold the two tabs on the front template in the direction shown, and insert them between the doors. 3.Align the front template with the end of the character line, and attach it to the left front door with strips of masking tape. 4.Peel back about 40 to 50 mm (1½ to 2 in.) of adhesive backing from each adhesive tape, and tape the ends to the front surface of the left front molding. Remove the other adhesive backings. 5.Align the left front molding with the front template and attach it to the left front door. 6.While applying light pressure against the left front molding, carefully remove the two adhesive backings. 7.Using the palm of your hand, firmly press the left front molding to the left front door for 30 seconds. 8.Remove the front template. 9.Using a rubber roller, apply firm pressure while rolling to set the adhesive. Apply firm pressure especially at the ends. 10.Using the alcohol swab, thoroughly clean the rear door where the left rear molding will attach. 11.Get the rear template. Fold the two tabs on the rear template in the direction shown, and insert them between the doors.