Home Auto Repair 2015 Acura RLX Illuminated Door Sill Trim Installation

2015 Acura RLX Illuminated Door Sill Trim Installation

95

Download 2015 Acura RLX Illuminated Door Sill Trim Installation – 1. Disconnect the negative cable from the battery. 2. Apply tape to the center console panel and the driver’s and passenger’s console side trims as shown. Move the shift lever to the N (neutral) position, and wrap a shop towel around the shift lever. 3. Remove the center lower trim (three clips, and unplug the vehicle connectors). 4. Remove the center lower panel (six clips, four hooks, and unplug the vehicle connectors). 5. Pull away the door opening seal, and remove the driver’s dashboard side lid (four clips, two retaining tabs, and three hooks). 6. Remove the driver’s dashboard lower cover (nine clips, and unplug the vehicle connectors and aspirator hose), then remove the plate (two clips). 7. Turn the knob, and remove the driver’s dashboard under cover (one clip, and unplug the vehicle connector). 8. Remove the driver’s front door sill trim (four clips and six retaining tabs). 9. Pull away the door opening seal, and remove the driver’s kick panel (two clips). 10. Pull away the door opening seal, and remove the passenger’s dashboard side lid (four clips, two retaining tabs, and three hooks). 11. Reconnect the negative cable to the battery, then press the engine start/stop button to select the ON mode. Open the glove box. 12. Press the engine start/stop button to select OFF mode, then disconnect the negative cable from the battery.