Download 2015 Honda Civic 2-Door Illuminated Door Sill Trim Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Release the passenger’s front door sill trim (eight clips, two hooks, and two retaining tabs). 3. Pull away the door opening seal, and remove the passenger’s kick panel (two clips). 4. Remove the glove box: • Remove two bolts. • Open the glove box, push inward on the stops, and remove the glove box. 5. Remove the trunk lid/fuel fill door opener cover (four retaining tabs and two hooks). Remove one selftapping screw. Using the key, unlock the trunk lock. 6. Remove the lower anchor bolt, and release the driver’s front door sill trim (seven clips, one hook, and two retaining tabs). 7. Pull away the door opening seal, and remove the driver’s kick panel (two clips). 8. Remove the driver’s dashboard lower cover (nine clips and unplug the vehicle connectors, if equipped). 9. To protect the vehicle, attach tape to the dashboard in the areas shown. Move the shift lever to the “N” (neutral) position, and wrap a shop towel around the shift lever. 10. Remove the center lower panel (two self-tapping screws, four clips, and unplug the vehicle connectors, if equipped). Routing the Door Sill Trim Harness 11. Using isopropyl alcohol on a shop towel, thoroughly clean the door sill trim harness fuse case where the fuse label will attach.