Download 2006 Hyundai Tiburon GT Clutch System Service Manual – REMOVAL 1. Drain the clutch fluid and transaxle gear oil. 2. Remove the transaxle assembly. 3. Insert the special tool (09411-25000) in the clutch disc to prevent the disc from falling. 4. Loosen the bolts that attach the clutch cover to the flywheel in a star pattern. 5. Loosen the bolts in succession, one or two turns at a time, to avoid bending the cover flange. CAUTION: DO NOT clean the clutch disc or release bearing with cleaning solvent. INSPECTION CLUTCH COVER ASSEMBLY 1. Check the diaphragm spring end for wear and uneven height. Replace if wear is evident or height difference exceeds the limit. Limit: 0.3 mm (0.012 in.) 2. Check the pressure plate surface for wear, cracks and color change.