Home Auto Repair 1997 Subaru Legacy GT Sedan Timing Belt Service Manual

1997 Subaru Legacy GT Sedan Timing Belt Service Manual

80
Download 1997 Subaru Legacy GT Sedan Timing Belt Service Manual – Crankshaft and camshaft sprocket alignment. (1) Align mark on crankshaft sprocket with mark on the oil pump cover at cylinder block. Zoom Sized for Print (2) Align single line mark on right-hand exhaust camshaft sprocket with notch on belt cover. Align single line mark on right-hand exhaust camshaft sprocket with notch on belt cover. (Make sure double lines on intake camshaft and exhaust camshaft sprockets are aligned.) Zoom Sized for Print (4) Align single line mark on left-hand exhaust camshaft sprocket with notch on belt cover by turning sprocket counter-clockwise (as viewed from front of engine). When timing belts are not installed, four camshafts are held at the “zero-lift” position, where all cams on camshafts do not push intake and exhaust valves down. (Under this condition, all valves remain un-lifted.) When camshafts are rotated to install timing belts, #2 intake and #4 exhaust ALLDATA Online – 1997 Subaru Legacy GT Sedan AWD F4-2.5L DOHC – Installation Page 11 of 16 cam of left-hand camshafts are held to push their corresponding valves down. (Under this condition, these valves are held lifted.)