Home Auto Repair '04 Chrysler Town/Country Limited Blower Motor Repair Manual

'04 Chrysler Town/Country Limited Blower Motor Repair Manual

77
Download ’04 Chrysler Town/Country Limited Blower Motor Repair Manual – The blower motor is located on the passenger side of the vehicle under the instrument panel. The blower motor can be removed from the vehicle without having to remove the HVAC housing. 1. Disconnect and isolate the battery negative cable. 2. Remove the passenger side door sill plate and cowl panel. 3. Pull back the carpet to access the front lower air intake screw. 4. Remove the recirculation door actuator (Refer to RECIRCULATION DOOR ACTUATOR ). 5. Disconnect the recirculation door actuator wire harness lead from the routing clip on the lower air inlet housing and position the wire harness aside. 6. Disconnect the blower motor pigtail harness connector from the blower motor resistor block or power module, depending how vehicle is equipped. 7. Remove the one screw (from the top) that secures the lower air inlet housing to the upper air inlet housing (Fig. 8 ).