Download 2015 Honda Odyssey Hatch Tent Set Installation Manual Instructions – 1. Park the vehicle on smooth level ground, with the transmission in park. Apply the parking brake. 2. With the tent approximately 5 feet away from the rear of the vehicle, prepare the tent. • Remove the tent from the tent bag, and lay it flat on the ground with the straps facing the rear of the vehicle, and “H” emblem away from the vehicle. Do not stake the tent at this time. • Unfold the two tent poles (11 segments each) and assemble each of the connected sections into one long pole. • Slide each connected pole through the sleeves in the roof of the tent. 3. With the help of an assistant, setup the tent: • Starting at any corner, insert the corner tent pin into the bottom of the tent pole. • At the opposite corner of the tent, walk towards the tent while you flex the tent pole and stand up the center of the tent. Insert the tent corner pin into the bottom of the tent pole. • Repeat this procedure to setup the remaining tent pole. • When the tent is standing, attach the plastic clips at each corner around the tent poles. 4. Move the tent towards the rear of the vehicle. Slip the sock over the roof and the around the sides of the vehicle. The magnetic strips will hold the sock to the vehicle. Install the magnetic strips carefully because the magnets are very strong.