Download ’84 Lincoln Town Car Front Door Trim Panel Service Manual – Removal Note: During service, disconnect the remote rod-to-lock knob assembly prior to lifting off the housing plate to avoid possible damage to the lock knob assembly. The following procedure must be used during removal and installation of the door armrest and trim panel. Refer to the appropriate illustrations for component identification. 1. Remove the retaining screws from the door inside handle cup assembly. If equipped with armrest courtesy lamps, remove the lens, detach the bulb and wiring assembly from the pull cup and remove the pull cup. 2. Disconnect the remote lock rod from the lock knob assembly. Gain access through pull cup opening. 3. Using a putty knife or similar tool, carefully pry window switch bezel from armrest.