Home Auto Repair Harley Davidson Instrument Gauge Bezel Cover Kit Installation

Harley Davidson Instrument Gauge Bezel Cover Kit Installation

80

Download Harley Davidson Instrument Gauge Bezel Cover Kit Installation Instructions – 1. Clean the instrument bezel and bezel cover with a mixture of 50-70% isopropyl alcohol and 30-50% distilled water. Allow to dry thoroughly. 2. See Figure 1. Cut the tape (1) into five equal pieces. 3. Remove the paper liner from one side of the tape, and apply the tape to the front face of the gauge, pressing firmly into place. Space all five pieces equally as shown. 4. Remove the outer liner from the tape. 5. Place the bezel over the gauge, and press firmly into place. 3 2 4 1 is00986a 1. Tape (cut into 5 pieces) 2. Instrument bezel 3. Instrument bezel cover 4. Apply tape to this surface Figure 1. Chrome Instrument Bezel Installation