Download The airbag backup power supply must be depleted before component service is performed. To deplete the backup power supply energy, disconnect the battery ground cable and wait one minute. 1. Disconnect the battery ground cable and wait one minute for airbag backup power supply to be depleted. 2. Remove the two hinge-to-instrument panel screws and remove the glove compartment. 3. Remove the passenger airbag module. WARNING: When carrying a live air bag, make sure the bag and trim cover are pointed away from your body. In the unlikely event of an accidental deployment, the bag will then deploy with minimal chance of injury. In addition, when placing a live air bag on a bench or other surface, always face the bag and trim cover up. This will reduce the motion of the module if it is accidentally deployed.