Home Auto Repair Instructions for the Use and Care of Your Acura Car Cover

Instructions for the Use and Care of Your Acura Car Cover

124

Download Instructions for the Use and Care of Your Acura Car Cover – INSTALLATION OF THE COVER When installing your cover, make sure that the mirror pockets on the sides of the cover are pulled over the mirrors before pulling the ends of the cover over the bumpers (see figure A). The elastic ends of your cover will keep it secure under normal conditions. On windy days, or for prolonged storage, it is advisable to use a lock and cable fastened to the grommets at the sides of the cover. The lock and cable are included in this kit. REMOVAL To remove the cover, first release both ends from under the bumpers. Fold the cover from one side of the car toward the middle. Remove the mirror pockets from the side mirrors carefully; do not pull or tug on them as this may tear the cover, or break the
mirrors. Make the fold about two feet wide (see figure B). Make the same fold from the other side of the car to meet the first folded section. Then fold the cover from the front to the back of the car in two foot folds (see figure C).