Download Increase and help the vehicle. Connect the authorised Jaguar diagnostic system. Make sure J-Gate shift selector is within the Park position (P). With the engine running and the foot brake applied, move the J-Gate shift selector through “P-R-N-D-four-three-2″ and again to the “P” place to circulate the automated transmission fluid until the temperature reaches 30 to forty°C (86 to 104°F) on the accepted Jaguar diagnostic system. 5. When the automatic transmission fluid temperature reaches 35°C (95°F) test that the selector lever is in the “P. place increase the vehicle. 1. 2. 3. 4.6. With the engine operating, remove the automated transmission fluid level tube plug. Remove and discard the sealing washer.7. If the automated transmission fluid doesn’t come out of the transmission fluid stage tube the automatic transmission fluid degree is insufficient.