Download REAR ABSORBER REMOVAL 1. Remove rear fascia, refer to (Refer to REAR FASCIA ). 2. Remove rivets attaching absorber to rear crossmember (Fig. 6 ). 3. Separate absorber from vehicle. INSTALLATION 1. Position absorber on vehicle. 2. Install rivets attaching absorber to rear crossmember. (Fig. 6 ) 3. Install rear fascia, refer to (Refer to 13 – FRAMES & BUMPERS/BUMPERS/FRONT FASCIA – INSTALLATION ). REAR FASCIA REMOVAL 1. Raise and support vehicle. 2. Remove wheels. 3. Remove plastic push pins attaching fascia to fuel tank skid plate. 4. Remove plastic rivets attaching fascia to wheel liner. 5. Remove nuts attaching upper edge of fascia to quarter panel and wheel liner (Fig. 5 ).