Home Auto Repair 2004 Suzuki Forenza Concentric Slave Cylinder Removal and Installation Removal

2004 Suzuki Forenza Concentric Slave Cylinder Removal and Installation Removal

70
Download 1. Remove the transaxle from the vehicle. 2. Remove the concentric slave cylinder retaining bolts. 3. Disconnect the concentric slave cylinder pipe from the concentric slave cylinder. 4. Remove the bushing from the concentric slave cylinder pipe in the transaxle housing. 5. Remove the concentric slave cylinder pipe. 6. Remove the O-ring and the concentric slave cylinder. Installation 1. Install the concentric slave cylinder and the pipe. 2. After installing the pipe screw provisionally, tighten the concentric slave cylinder retaining bolts. Tighten the concentric slave cylinder retaining bolts to 7 Nm (62 inch lbs.) . 3. Tighten the pipe screw. Tighten the pipe screw to 15 Nm (11 ft. lbs.) . 4. Install the bushing onto the transaxle housing. 5. Connect the pipe with bushing. 6. Install the transaxle into the vehicle.