Home Auto Repair 1998 Ford Ranger Engine REMOVAL

1998 Ford Ranger Engine REMOVAL

88
Download 1. Relieve the fuel pressure. For additional information, refer to Section 310-00. 2. Disconnect the battery ground cable (14301). For additional information, refer to Section 414-01. 3. Drain the engine cooling system. For additional information, refer to Section 303-03. 4. Remove the hood (16612). 5. Remove the air cleaner outlet tube (9B659). For additional information, refer to Section 303-12. 6. Remove the accelerator control splash shield (9E766). 7. Remove the upper radiator hose (8260). 8. Remove the lower radiator hose (8286). 9. Remove the two bolts and position the fan shroud (8146) on the fan blade (8600). 10. Remove the water pump pulley, fan and shroud; refer to Section 303-03. 11. Disconnect the radiator overflow tube. 12. On vehicles equipped with automatic transmissions, disconnect the transmission cooler lines. 13. Disconnect the mass air flow sensor. 14. Disconnect the heater water hoses (18472) at the inlet and outlet; refer to Section 303-03. 15. Disconnect the power connection from the generator (10346). 16. Disconnect the vacuum connection to the vacuum reservoir. 17. Disconnect the throttle body heater hose.