Home Auto Repair AUDI A4 AVANT SERVICE MANUAL

AUDI A4 AVANT SERVICE MANUAL

65
Download 1. Removing fasteners from the exhaust brackets to lower exhaust, support as needed to prevent damage. 2. Raise hitch into position. Using a center punch, punch through the center hole of the hitch and into the heat shield. 3. Lower hitch and cut out the area of the heat shield covering the access hole. See heat shield trim detail. 4. Fishwire 1/2-13 X 1 1/2″ carriage bolt and SP6 spacer through the access hole and out the forward most hole in frame, both sides. (SEE FISHWIRE TECHNIQUES) 5. Reverse fishwire 1/2-13 X 1 1/2″ carriage bolt and SP6 spacer through the access hole, both sides. (SEE REVERSE FISHWIRE TECHNIQUES) 6. Open rear hatch and remove middle lid covering the spare tire. 7. Remove the rear most tie down latches from both side rails. 8. Remove the side rails. 9. Remove the forward most bumper bracket fastener and return to owner. 10. Replace bumper bracket fastener with M10-1.5 X 110 hex bolt and 7/16″ flat washer, both sides. 11. Torque M10-1.5 X 110 hex bolts to 35 ft-lbs. 12. Reinstall all trunk components and close hatch