Home Auto Repair 2003 Ford Ranger Water Pump – (3.0L) Removal

2003 Ford Ranger Water Pump – (3.0L) Removal

Download 1. 2. 3. 4. Disconnect the battery ground cable. Drain the cooling system. Remove the air cleaner outlet tube. Remove the fan blade and the fan shroud. 5. Disconnect the water bypass tube. 6. Remove the accessory drive belt. 7. Remove the bolts and the water pump pulley. 8. Remove the bolts from the A/C compressor mounting bracket. 9. Disconnect the lower radiator hose. 10. Remove the bolts and position the bracket and compressor aside. 11. Remove the bolts and remove the water pump. 12. Clean the sealing surfaces.