Download Model(s): Touareg with Tire Pressure Monitoring System Condition Tire Pressure Monitoring System Warning Light is ON. Service Note: Before performing this Technical Bulletin see Technical Bulletin Group 44 Number 04-02. – Perform the following three steps in order. 1. Check and, if necessary, replace Tire Pressure Monitoring Control module prior to VIN: 4D018766. 2. Reassemble vehicle and follow “store tire pressure values” instructions 3. Diagnosis information listed in VESIS under ’additional information 1. Check and if necessary, replace Tire Pressure Monitoring Control module prior to VIN: 4D018766 – Switch ignition OFF. – Remove bolt -4- (2x). – Pry driver side footwell cover -5- out of mountings near clip -6- using wedge T10039/1. – Pull cover out of rear mountings. – Disconnect footwell light -3- from wiring harness. – Separate wiring harness -1- from diagnosis plug -2-. 2. Follow instructions in Owner’s Manual “Tire pressure monitoring system” to store tire pressure values If system learns and stores values and no warning lights are ON. z Work is complete. – If system does not learn and store values or warning lights are ON. – Continue with Step 3.