Download 3. Remove the instrument panel top cover (Fig. 15). a. Using a trim stick (special tool C-4755) or equivalent, gently pry off the left and right A-pillar trim. Refer to: “Body and Frame : Interior Trim : Service and Repair” See: Trim PanelService and Repair b. Using a trim stick or equivalent, gently pry out the front power window switch from the instrument panel center bezel. Disconnect the harness connector and remove. c. Remove the one center bezel retaining screw. d. Pull off the HVAC control knobs. e. Using a trim stick or equivalent, gently pry off the center bezel and remove. f. Remove the two top cover retaining screws. g. Gently pull rearward on the top cover and unlatch it from the instrument panel and remove.