Download Removing Procedure 1. Disable the SIR system. Discuss with Disabling the SIR System in SIR. 2. 3. 4. 5. 6. Remove the screws (5) from the cluster trim plate (1). Gently pry out the cluster trim plate (1). Disconnect the electrical connector (three) from the instrument panel lamp dimmer . Disconnect the hazard warning change (four). Remove the cluster trim plate (1). Installation Procedure 1. Join the hazard warning switch (four). 2. Connect the electrical connector (3) from the instrument panel lamp dimmer. 3. Align the cluster trim plate (1) tabs to the retainers. Notice Use the correct fastener in the right location. Alternative fasteners have to be the proper half number for that application. Fasteners requiring alternative or fasteners requiring the usage of thread locking compound or sealant are recognized within the service procedure. Don’t use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified.