Download ADJUSTMENTS VALVE CLEARANCE Engine is equipped with hydraulic lifters. Adjustment is not necessary. REMOVAL & INSTALLATION FUEL PRESSURE RELEASE Remove fuel pump relay (lower right relay located in fuse/relay panel). start engine and let idle until it stalls. Crank engine for an additional 5 seconds. Reinstall fuel pump relay. ENGINE NOTE: Engine is removed with transaxle attached. Removal 1. Obtain radio code. Turn ignition off and wait 20 seconds. Disconnect negative battery cable. Remove air cleaner assembly. Install 8-mm bolt in belt tensioner hole and remove service belt. See Fig. 2 . 2. On manual transmission models, disconnect clutch slave cylinder. On all models, remove power steering pump and attach to body. DO NOT disconnect power steering hoses. Remove radiator, front lock support and front bumper. Drain cooling system. Disconnect cooling fan and thermoswitch.