Home Auto Repair 2004 BMW 330Ci Driver Side Air Bag Module Removal Installation

2004 BMW 330Ci Driver Side Air Bag Module Removal Installation

40
Driver-side air bag module elimination & set up (four-spoke steering wheel) 1. Before proceeding, see air bag safety precautions . Disable air bag system. See disabling system beneath disabling & activating air bag system. 2. Remove screw from decrease steering column trim and take away trim. Pull orange electrical connector off steering column and disconnect. Utilizing t30 torx bit with lengthy shank, remove air bag module torx screws from rear of steering wheel. Raise up air bag module to disconnect wiring connector from rear of module. Put air bag module in a safe space with trim pad (air bag) facing upward. 3. To put in, reverse removal procedure. Tighten air bag module torx screws to specification. See torque specifications . Activate air bag system. See activating system beneath disabling & activating air bag system. Elimination & installation (three-spoke steering wheel) 1. Earlier than proceeding, see air bag safety precautions . Disable air bag system. See disabling system under disabling & activating air bag system.