Home Auto Repair 2007-2009 HONDA 420 RANCHER 2×4/4×4 CLUTCH KIT INSTALLATION INSTRUCTIONS

2007-2009 HONDA 420 RANCHER 2×4/4×4 CLUTCH KIT INSTALLATION INSTRUCTIONS

81
Download ATV’s can be dangerous. EPI has no control over the use of any part. EPI expects the customer to exercise good judgment as to the proper selection, installation, use and maintenance of any part. EPI assumes no responsibility for damage or injury of any kind because of misuse, improper installation and improper application of any parts in any way by any person. Contact your local dealer to schedule installation of this clutch kit if you are not a qualified ATV mechanic. This product is NOT to be installed on any ATV that will be used by any person under the age of 16. Tools needed to install clutch kit – Metric socket set – 27mm socket – 1/2″ impact wrench – Torque wrench – Phillips and flat tip screwdrivers – Spring tool or bent pliers – 5mm Allen wrench – 10mm & 14mm wrench – 2 C-Clamps – Honda clutch tool #07933-HB3000A – Honda motor oil – Honda coolant – Honda Bond or Yamabond Semi-drying liquid gasket (or similar semi-drying liquid gasket) GASKETS NEEDED TO INSTALL CLUTCH KIT – None, only need tube of semi-drying liquid gasket ENGAGEMENT – 25-2,600 rpm’s 1. Remove key from the ignition switch. Remove the side panels from both sides.