Download Civic EX/Si 92-00, Del Sol Si/VTEC 92-95, Integra GSR/Type R 94-01,Prelude 97-01 S2000. Installation 1. Locate the original ECU. On most cars it is in the passenger side “kick panel” near the passenger’s feet. On the Prelude models, it is on the floor directly below the passenger’s feet. On the S2000 the ECU is located in the left side kick panel. 2. Locate the plugs needed for the VPAC wiring connections by looking at the illustration for your model and year. 3. Mount the VPAC using the “hook and loop” fastener tape to a convenient location on the dash or in the glove box. Route the wires to the ECU location. 4. Follow the instructions for your vehicle to complete the wiring. 5. Reinstall the ECU, ECU cover/kick panel/carpeting in the reverse order of removal. 6. Go have fun with your new VPAC. Civic EX/Si 92-95 and Del Sol SI/VTEC 92-95 1. Solder or T-Tap the Yellow/Black wire of the VPAC to the Yellow/Black wire of the ECU at location A 25. 2. Solder or T-Tap the Blue wire of the VPAC to the Blue/Green wire of the ECU at location B15. 3. Solder or T-Tap the Red/Black wire of the VPAC to the TPS wire. The TPS wire was a different color for each year.
Home Auto Repair 1994-2001 Integra GSR/Type R Vtec Performance Amplifier Control Installation Instructions