Home Auto Repair ’03 Hummer H2 Remote Keyless Entry (RKE) System Inoperative

’03 Hummer H2 Remote Keyless Entry (RKE) System Inoperative

74
Download ’03 Hummer H2 Remote Keyless Entry (RKE) System Inoperative – Service Procedure Vital: The labor time for performing the refresh/reprogram of the passenger door module in this recall is totally different than the period of time allowed in Service Bulletin 03-08-fifty two-001B. The labor operation code and time allowance within the service bulletin was for a BCM reprogram, and was not the correct labor operation code for this repair.Vital: The next inspection must be performed with a view to decide the right repair procedure. 1. Flip the ignition to the ON position. 2. Using the switches in the precise entrance passenger door, verify that the facility window and power door lock situated in that door, operate properly. • If the ability window and door locks do NOT perform, proceed to the “Refresh and Reprogram” procedure and follow ALL of the steps.