Home Auto Repair 1997 Ford E-Series Steering Column Shift Selector Tube Removal Installation

1997 Ford E-Series Steering Column Shift Selector Tube Removal Installation

99
Download 1. WARNING: ON VEHICLES EQUIPPED WITH AN AUXILIARY BATTERY, BOTH THE NEGATIVE AND POSITIVE BATTERY CABLES MUST BE DISCONNECTED. WARNING: ON VEHICLES EQUIPPED WITH A 7.3L ENGINE, BOTH THE PRIMARY AND SECONDARY BATTERIES MUST BE DISCONNECTED. Disconnect the battery. Refer to Section 414-01 . 2. Remove the ignition switch lock cylinder (11582). 1. Position the lock cylinder to RUN. 2. Using a suitable tool, push upward on the cylinder release tab through the hole in the lower shroud while pulling the cylinder outward. 3. Remove the instrument panel steering column cover, the driver side knee brace and the instrument panel steering column opening cover reinforcement. 4. Disconnect all necessary harness connectors and separate the harness bracket from the steering column. 5. Remove the shift indicator cable and position it aside. 6. Remove the 4 nuts and lower the steering column. 7. Remove the upper shroud. 8. NOTE: