Download ’95-2010 Harley Davidson Tru-Power Chrome Slip-On Muffler Set – INSTALLATION INSTRUCTIONS 1. Be sure motorcycle is properly secured before you begin. 2. Remove saddlebags and place aside. 3. Begin removing your stock mufflers. Starting on one side of the bike, loosen the clamp securing the muffler to the headpipe. Remove the two bolts securing the muffler to the mounting bracket on the saddlebag support of the bike. Keep these bolts for use with your new slip-on mufflers. 4. Using supplied clamp over new slip-on muffler install over stock headpipe. Align the mount tab with holes in the mounting bracket on the saddlebag support. Note that there is a left and a right side pipe. The clearance dent is on the side closest to the swingarm providing clearance on many models. Secure pipe with stock bolts. Be sure to apply Loctite® to bolts upon re-installation. 5. Securely tighten bolts, and then tighten the clamp securing the slip-on muffler to the headpipe. 6. On the opposite side of the bike, repeat steps 3-5. 7. Reinstall saddlebags. 8. Be sure to check proper alignment and clearances before riding. 9. Every time you perform regular maintenance be sure to re-torque all clamps and fasteners.