Home Auto Repair 2002 Ford Focus Engine ASSEMBLY

2002 Ford Focus Engine ASSEMBLY

75
Download 1. CAUTION: Do not use abrasive grinding discs to remove the gasket material; use only plastic manual scrapers. Do not scratch or gouge aluminium sealing surfaces. NOTE: All bearing surfaces must be lubricated before assembly or installation. NOTE: The crankshaft main bearings are precision selective fit. For additional information, refer to Section 303-00. Install the main bearings. 1. Upper crankshaft main bearing. 2. Crankshaft thrust main bearing. 2. Install the crankshaft. 3. NOTE: The crankshaft main bearings are numbered 1 to 5 with No. 1 at the front of the engine. Make sure the arrow faces the front of the engine. NOTE: Apply axial load to the rear of the crankshaft simultaneously to tightening of the bolts. For additional information, refer to Section 303-00. Install the five lower crankshaft main bearings and the five main bearing caps. 4. Install the piston and connection rod assemblies. 5. Install the four crankshaft rod caps. 6. NOTE: Coat the rear oil seal area and the crankshaft rear oil seal lip with engine oil. NOTE: