Home Auto Repair 2002 Honda Civic Dx Sedan 1.7l Sohc Trim Panel Removal

2002 Honda Civic Dx Sedan 1.7l Sohc Trim Panel Removal

123

Download Take care not to bend or scratch the trim and panels. 1. Remove the trim as shown: To remove the door sill trim and B-pillar upper trim, remove the side trim panel as necessary. To remove the front side cap and opener lock cylinder, refer to trunk lid opener/fuel fill door opener replacement. 2. Install the pants in the reverse order of removal, and note these items: Replace any damaged clips. Apply liquid thread lock to the anchor bolts before installation. Before installing the anchor bolts, make sure there are no twists or kinks in the seat belts. Special Tools Required KTC trim tool set SOJATP2014 4-door NOTE: Put on gloves to protect your hands. Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. Take care not to bend or scratch the trim and panels. 1. Remove the trim as shown: To remove the driver’s kick panel, remove the footrest. To remove the seat side trim, remove the rear seat side bolster. To remove the front side cap and opener lock cylinder, refer to trunk lid opener/fuel fill door opener replacement. 2. Install the parts in the reverse order of removal, and note these items: Replace any damaged clips. Apply liquid thread lock to the anchor bolts before installation. Before installing the anchor bolts, make sure there are no twists or kinks in the seat belts.