Download 1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive shift strategy. Remove the battery. For additional information, refer to Section 414-00. 2. Loosen the clamps and remove the air cleaner tube. 3. Remove the air cleaner assembly. For additional information, refer to Section 303-04. 4. Disconnect the electrical connectors. 1. Disconnect the digital transmission range (TR) sensor electrical connector. 2. Disconnect the transaxle electrical connector. 3. Disconnect the speed control electrical connector. 5. Remove the transmission selector cable from the bracket. 1. Disconnect the transmission selector cable end from the manual lever. 2. Push the lock tab and separate the transmission selector cable from the bracket. 3. Position the transmission selector cable out of the way. 6. Disconnect the wire harness from the bracket. 7. Remove the manual control lever. 8. Remove the hood. 9. Remove the wiper arm and pivot assembly.