Download 1. Disconnect the battery ground cable. For additional information, refer to Section 414-01. 2. Remove the air cleaner outlet tube. For additional information, refer to Section 303-12. 3. Remove the air cleaner housing. 1. Disconnect the mass air flow (MAF) sensor electrical connector. 2. Remove the bolt. 3. Remove the housing. 4. CAUTION: To disconnect the normal fitting, squeeze the tabs and pull straight out or damage to the fitting may occur. Disconnect the crankcase ventilation tube. 5. Disconnect the fuel line. For additional information, refer to Section 310-00. 6. Disconnect the evaporative emission canister purge valve hose. 7. Remove the vapor management valve (VMV) cover. 8. Position the VMV aside. 1. Disconnect the vacuum hose. 2. Disconnect the purge line. 3. Remove the nuts and position the valve aside. 9. Position the engine vacuum regulator (EVR) solenoid aside. 10. Remove the bracket. 1. Remove the hose. 2. Remove the bracket.