Download Removal 1. Remove fuel tank (9002) as described. 2. Remove any dirt that has accumulated around fuel pump module retaining flange. 3. Turn fuel pump module locking retainer ring counterclockwise using Fuel Tank Sender Wrench 310-002 (T74P-9275-A) and remove fuel pump module locking retainer ring. 4. Pull fuel pump module sender plate up out of fuel tank until locking tabs for fuel pump module are accessible. Reach through fuel pump module opening, squeeze both locking tabs together and remove fuel pump module from fuel tank . 5. Remove O-ring seal and discard. Installation 1. Clean fuel pump module retaining flange, fuel tank mounting surface and seal ring groove. 2. Apply a light coating of Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-BA on a new O-ring seal to hold it in place during assembly and install O-ring in seal ring groove. 3. Install fuel pump module carefully into fuel tank to make sure that filter, hoses and float rod are not damaged or binding.