Download All vehicles CAUTION: Electronic modules are sensitive to static electrical charges. Avoid exposing any modules to static electrical charges, as this may cause damage to the modules. 1. Depower the supplemental restraint system (SRS). For additional information, refer to Section 501-20B. Vehicles with Police option 2. Position the glove compartment battery junction box (BJB) wiring harness aside. 1. Disconnect the electrical connector. 2. Remove the wire tie(s). All vehicles 3. If equipped, remove the floor console. For additional information, refer to Floor Console in this section. 4. Position the speed control actuator aside. 1. Remove the nuts. 2. Disconnect the electrical connecor. 5. Loosen the bolt and disconnect the LH bulkhead electrical connector. 6. Release the retainers and position the bulkhead electrical connector through the dash panel. 7. Disconnect the A/C temperature sensor electrical connector.