Home Auto Repair INSTALLATION INSTRUCTIONS FORD EXPEDITION 2/4WD

INSTALLATION INSTRUCTIONS FORD EXPEDITION 2/4WD

125
Download STEP 1. REMOVE THE LICENSE PLATE AND MOUNTING BRACKET FROM THE FRONT BUMPER STEP 2. BEGINNING WITH THE DRIVER SIDE, LOCATE AND REMOVE THE TWO HEX NUTS FROM THE BOLT ASSEMBLY THAT SECURE THE BUMPER TO THE FRAME FLANGE. STEP 3. POSITION 1122BD LOWER BRACKET OVER THE BOLTS, AND ATTACH IT TO THE FRAME FLANGE USING THE FACTORY NUTS. (FINGER TIGHTEN ONLY) STEP 4. INSERT 1122AD UPPER BRACKET THROUGH THE OPENING IN THE GRILLE, AND ATTACH IT TO 1122BD LOWER BRACKET USING THE 5/16” HEX HEAD BOLTS. (FINGER TIGHTEN ONLY) STEP 5. REPEAT THE ABOVE STEPS FOR THE PASSENGER SIDE BRACKETS STEP 6. ATTACH THE GRILLE GUARD ASSEMBLY TO THE LOWER BRACKETS USING THE –” FASTENERS STEP 7. ATTACH THE GRILLE GUARD ASSEMBLY TO THE UPPER BRACKETS USING THE 3/8” FASTENERS STEP 8. ALIGN THE GRILLE GUARD ASSEMBLY WITH THE FRONT OF THE VEHICLE AND TIGHTEN ALL MOUNTING NUTS AND BOLTS. STEP 9. ATTACH 1122LP LICENSE PLATE BRACKETS AND THE LICENSE PLATE TO THE BOTTOM SIDE OF THE GRILLE GUARD CENTER PLATE,