Home Auto Repair 2006 Ford Freestyle SE DRIVESHAFT REPLACEMENT INSTRUCTIONS

2006 Ford Freestyle SE DRIVESHAFT REPLACEMENT INSTRUCTIONS

70
Download 1. With the automobile in NEUTRAL, place it on a hoist. For extra data, check with JACKING & LIFTING . 2. Take away the muffler and tail pipe. For added information, discuss with REMOVAL AND INSTALLATION . 3. Take away the exhaust help brace bolts, then the exhaust assist brace. To install, tighten to 30 Nm (22 lb-ft).Fig. four: Finding Exhaust Help Brace Courtesy of FORD MOTOR CO. WARNING: Failure to accurately index-mark the driveshaft will result in noise, vibration or harshness (NVH) problems. NOTE: Index-mark the driveshaft to the rear axle pinion flange, the ability take off (PTO) flange and the center bearing bracket. 4. Index-mark the driveshaft. WARNING: All the time install new driveshaft flange bolts when removed. NOTE: Use a cross sample to tighten the driveshaft flange bolts.5. Take away and discard the driveshaft flange bolts from the rear axle pinion flange, then disconnect the driveshaft from the rear axle pinion flange. To install, tighten to 25 N.m (18 lb-ft). WARNING: All the time set up new driveshaft flange bolts when removed. NOTE: