Download Fig. Multi-function switch component locations 1998-2000-2000 shown NOTE Before servicing, or working around, the SRS system, turn the ignition switch OFF, disconnect both battery cables and wait at least three minutes. When servicing, or working around, the SRS system do not work directly in front of the air bag module. 1. Before servicing the vehicle, refer to the Precautions Section. 2. Position the front wheels in the straight ahead position. 3. Disconnect the negative battery cable. Disconnect the positive battery cable. 4. Remove the side lids, located on the steering wheel. 5. Remove the right and left side special (Torx) bolts. 6. Lift up on the air bag module. 7. Disconnect the air bag harness connectors. Remove the air bag module. 8. Be sure the steering wheel is positioned in the neutral position. 9. Disconnect the horn connector from the steering wheel (floating horn bracket). 10. Release the spiral cable connectors from the steering wheel by sliding off the connector brackets. 11. Remove the steering wheel locknut.